You use g3 filter media in your mvhr system to help keep the air inside clean and healthy. This filter is better than G2 but not as strong as G4. It works well to catch dust, pollen, and other dirty things. G3 media helps stop outdoor pollution from getting inside your home. It also helps keep the air moving smoothly. When you use g3, you breathe in fewer solid particles and your system works better.
Key Takeaways
G3 filter media traps dust, pollen, and big particles. This helps make the air inside cleaner.
Change G3 filters every six to twelve months. You may need to change them more often in new homes or dirty places. This keeps the filter working well.
G3 filters do not cost much and are simple to take care of. They work well for homes in clean places.
G3 filters stop big particles but not tiny dust, smoke, or germs. Use better filters if you want more protection.
Put in new filters the right way. This helps your MVHR system work well and last longer.
How Is G3 Filter Media Used in MVHR Systems?
G3 filter media in MVHR (Mechanical Ventilation with Heat Recovery) systems primarily captures larger airborne particles like dust, pollen, and insects. It serves as the first line of defense, protecting the heat exchanger and internal components from contamination while maintaining system efficiency.
What is g3 filter media?
G3 filter media is found in many new air systems. This filter uses PPI 30 material. It is called Coarse 50% by ISO 16890. The main job is to block big particles. You can trust it because it meets strict hygiene rules. It is certified by VDI 6022.
Material Type | Description |
|---|---|
Filtering Material | PPI 30 filtering material |
Classification | Coarse 50% by ISO 16890 |
Purpose | Blocks big particles from air handling unit |
Hygienic Requirements | Certified by VDI 6022 |
G3 filter media is a coarse filter. It catches big things like pollen and dust. These are common in homes and buildings. This filter removes visible dust and helps air quality. It can catch particles between 3.0 and 10 microns. For particles bigger than 10 microns, it works 80–90% of the time.
Particle Size Range | Filtration Efficiency |
|---|---|
3.0 to 10 microns |
Role in mvhr units
G3 filter media is used in homes and businesses. It helps clean air by trapping big contaminants. This stops them from getting inside. When you use g3 filter media, you protect your home from pollen and dust. It also blocks some car emissions. The filter keeps your mvhr unit working well. It stops big particles from blocking the system.
G3 filter media is important for air cleaning. EN 779 and ISO 16890 say this filter has a MERV rating of 5. It catches about half of particles sized 3.0–10 microns.
Filter Type | MERV Rating | Efficiency (%) | Particle Size (microns) |
|---|---|---|---|
G3 | 5 | 50% | 3.0–10 |
You should change your g3 filter media two times each year. In new homes, change it every two months for six months. Change it more often if you have health problems or if the air outside is very dirty.
Change g3 filter media two times a year.
In new homes, change every 2 months for 6 months.
Change more often for health or dirty air.
Using g3 filter media in your mvhr system lowers contaminants. It keeps your indoor air fresh. This filter helps your system work well and last longer.
What Are the Filtration Capabilities of G3 Grade MVHR Filter Media?
G3 grade MVHR filter media provides basic filtration with approximately 80-85% efficiency for particles larger than 10 microns. It primarily captures larger airborne contaminants like dust, pollen, insects, and some textile fibers while allowing adequate airflow through mechanical ventilation heat recovery systems.
What g3 filters capture
When you use g3 filter media in your MVHR filter, you target some of the most common air pollutants. This media works well for homes and small offices. You can expect it to trap large particles that float in the air. These particles often come from outside or from daily activities inside your home.
Here are some of the main things g3 filters capture:
Pollen: If you have allergies, you know how important it is to keep pollen out. G3 filter media helps stop pollen grains from entering your living space.
Coarse dust: You find coarse dust in many places, like near roads or construction sites. This filter blocks much of that dust before it gets inside.
Automotive emissions: Cars and trucks release particles into the air. G3 filters can catch some of these larger particles, especially those from brake dust and tire wear.
Fibers and lint: You might not see them, but fibers from clothes and carpets float in the air. G3 filter media helps trap these, too.
Insect parts and plant debris: Sometimes, tiny bits of insects or plants get into the air. This filter can stop many of these from reaching your rooms.
Tip: If you live near busy roads or in an area with lots of plants, you will notice a big difference in air quality when you use a g3 filter.
You can see the types of particles g3 filter media targets in the table below:
Particle Type | Example Sources | Captured by G3? |
|---|---|---|
Pollen | Trees, flowers | ✅ |
Coarse dust | Roads, soil, building | ✅ |
Automotive emissions | Cars, trucks | ✅ |
Fibers and lint | Clothes, carpets | ✅ |
Insect/plant debris | Outdoors, windows | ✅ |
Fine dust | Smoke, cooking | ❌ |
Bacteria/viruses | People, pets | ❌ |
Limitations of g3 filtration
While g3 filter media does a good job with large particles, it has some limits. You need to know what it cannot do so you can make the best choice for your home.
Small particles pass through: G3 filters do not stop fine dust, smoke, or tiny particles from burning candles or cooking. These particles are smaller than 3 microns and can move right through the filter.
No protection from bacteria or viruses: If you want to block germs or very small allergens, you need a higher-grade filter.
Not for high-pollution areas: If you live in a city with lots of air pollution, g3 may not give you enough protection. You might need a filter with higher filtration efficiency.
Limited use for sensitive people: People with asthma or strong allergies may need more advanced filtration to feel safe and comfortable.
Note: G3 filter media works best for basic air cleaning. You can use it for extraction systems or in places where you only need to remove large particles. If you want to protect your health from fine dust or germs, you should look at other options.
You should choose g3 when you want simple, low-cost filtration and do not need to remove very small particles. This filter helps your MVHR system last longer by keeping big debris out. For most homes in clean areas, g3 filter media gives you a good balance between air quality and easy maintenance.
How Does G3 Filter Media Compare to G4 and G2 Filters?
G3 filter media occupies the middle ground in the filtration spectrum, with approximately 80-90% arrestance for particles larger than 10 microns. It offers better filtration efficiency than G2 filters (65-80% arrestance) but less than G4 filters (90%+ arrestance).
Filtration efficiency
When you pick a filter for your mvhr system, you want to know how well it traps particles. Filtration efficiency means what percent of particles the filter can catch. G2, G3, and G4 filters all work differently.
Here is a simple table that shows the differences:
Filter Class | Efficiency Range |
|---|---|
G2 | 65% to 80% |
G3 | 80% to 90% |
G4 | 90% and above |
G2 filters catch big particles but let more dust go through. G3 filters are better and trap more medium-sized particles. G4 filters are the best for fine particles and have the highest filtration efficiency. If you want cleaner air, you should pick G3 or G4 filters.
Use cases and pros/cons
You should think about where you live and what you need from your filter. Each filter grade is good for different places.
Filter Grade | Filtration Efficiency | Maintenance Frequency | Suitability |
|---|---|---|---|
G2 | Coarse filter for larger particles | Lower frequency | Basic air quality improvement |
G3 | Improved efficiency for smaller particles | Moderate frequency | Better for moderate air quality needs |
G4 | High efficiency for fine particles | Higher frequency | Suitable for high air quality environments |
G2 filters are good in places with little dust or pollution. You do not need to change them a lot. They cost less but do not stop small particles.
G3 filters give you better protection than G2. You do not have to change them as much as G4. They are good for homes in clean or country areas.
G4 filters are best if you want the cleanest air. You need to change them more often. They cost more but help in cities or dusty places.
Tip: If you live in the country or want basic protection, G3 filters are a smart pick. For city homes or if you have allergies, G4 filters may be better.
Here is another table to help you choose:
Filter Type | Best Suited Environment | Pros | Cons |
|---|---|---|---|
G3 Filter | Basic protection, rural or clean environments | Low pressure drop, cheaper | Doesn’t filter finer particles (e.g., fine dust, soot, allergens) |
G4 Filter | Standard residential use in moderate air quality environments | Good balance of filtration and airflow, affordable | Still not effective against fine particles (e.g., PM2.5) |
You should always pick the filter that fits your needs. Think about your air quality, how often you want to change the filter, and your budget.
Why Should You Choose G3 Filter Media for Your MVHR System?
G3 filter media is an optimal choice for MVHR (Mechanical Ventilation with Heat Recovery) systems because it effectively captures larger airborne particles while maintaining good airflow rates. This basic filtration level removes dust, pollen, and insects, providing adequate air quality for most residential applications without significantly impacting system efficiency.
When to use g3
You pick g3 filter media when you want good air and low cost. This filter is great for homes, offices, and schools. It helps make the air better but is not the strongest filter. If you live in the country or a place with clean air, g3 filter media keeps out big things like dust and pollen. You will not have to spend a lot of money or time on it. Many companies say to use G3 to M5 filters in mechanical ventilation with heat recovery systems. These filters can catch up to 95% of things floating in the air. This helps you have a cleaner and healthier space.
Tip: Use g3 filter media if you only need basic air cleaning. You get good airflow and your system works well.
Factors to consider
When you pick a filter, think about where you live, your money, and how often you want to check your system. G3 filter media gives you good filtering and does not block air too much. You save money on new filters and repairs. This helps your MVHR unit last longer and costs less to run.
They are easier to take care of and last longer.
Check and change your filters every six to twelve months.
If you live where it is dusty or dirty, change them more often.
Always look at what the maker says before you buy a filter. Makers say G3 to M5 filters work for most buildings. These filters are good for places like schools and hospitals.
How to replace your MVHR filter:
Turn off your system so it is safe.
Find the filters in your unit.
Take out the old filters and remember where they go.
Throw away the old filters the right way.
Put the new filters in the right spots.
Close and lock the panels.
Turn the system back on and make sure it works.
Picking the right filter keeps your air clean and helps your mechanical ventilation with heat recovery system stay healthy for a long time.
G3 filter media helps you keep your MVHR system running well and your air clean. You get good protection from dust and pollen without high costs. Always check your filters for dirt and replace them every six to twelve months.
CleanFilter and MVHR.shop offer filters that fit many systems and provide expert help if you need advice.
For best results, follow these steps:
Dispose of old filters safely.
Install new filters correctly.
Close panels tightly.
Turn your system back on and check its operation.
FAQ
How often should you replace a G3 filter in your MVHR system?
You should replace your G3 filter every six to twelve months. If you live in a new home or a dusty area, check and change it more often for best air quality.
Can you wash and reuse G3 filter media?
You cannot wash and reuse most G3 filter media. These filters lose their shape and effectiveness after washing. Always use a new filter for proper air cleaning.
Does a G3 filter remove odors from the air?
A G3 filter does not remove odors. It only traps large particles like dust and pollen. For odor control, you need a carbon or specialized filter.
What happens if you do not change your G3 filter regularly?
Airflow drops.
Your MVHR system works harder.
Indoor air quality gets worse.
You may face higher energy bills.
Regular filter changes keep your system healthy and your air clean.
